The Supple Pedic experience is unique and amazing. As
you relax on this mattress it will embrace you as you begin to settle into
our exclusive pressure relieving material (Polyfilax). You will feel it
conforming and supporting every part of your body. You will experience it
soothe the tension of your shoulder blades and lower back. You will
quickly realize there are no pressure points, your entire body is relaxed
and comfortable. You feel weightless, contented, relaxed at ease and
Supple-Pedic provides the lowest surface pressures of any mattress on the
market today. The result of this exceptional pressure relief combined with
proper support is simply the most comfortable mattress in the world.
Polyfilax is as close to perfection for providing comfortable and relaxing sleep as
any material existing today. Polyfilax is a unique and proprietary
formulation of a plastic memory copolymer material. This material is
similar to those developed by NASA for use in the space program. The
purpose of these materials was to reduce the unequal gravity and pressure
forces experienced by astronauts during lift off. Polyfilax has the
ability to balance load dispersal over an entire load mass. Polifilax is
also thermally activated, it becomes more pliable (liquid) and pressure
dispersing the warmer it becomes. Conceptually the warmth of the human
body produces a melting affect. This provides a sensation of floating.
Additionally, as the temperature of the material decreases as a result of
the distance from the body, it becomes gradually less fluid providing a
consistent and evenly distributed source of support.
Lever Support System is an exclusive
technology developed and tested by Strobel Technologies. It is an integral
part of the support design and unique support properties of the
Supple-Pedic line of mattresses. The benefit of the Lever Support System
is the provision of balanced support to recessed contours of the body. The
Lever Support system works in concert with the Polyfilax to provide
uniform contouring across the entire body, including the hips, shoulders
and small of the back.
The Lever-Support components are approximately 8 to 12 inches wide and constructed of high resilience spring wire rods.
Each Lever-Support looks like a ladder with an additional center
support fulcrum in the middle. There
are six Lever-Support modules running horizontally directly under the
Polyfilax layer. These
modules work in tandem as a system to compensate for unequal pressures.
Similar to a teeter-totter, when a comparably heavy weight, such as
the hips, is applied to one side of the Lever-Support, the other side
springs up to provide additional support to recessed areas such as the
lower back. The resulting
sensation is that of uniform support along the entire length of the body.
This unique combination provides the lowest surface pressures of any
mattress on the market today.
Longevitiy, testing and warranty
In testing with the Octagonal Roller Test the
Supple-Pedic endured over 300,000 cycles, or 600,000 passes of a 240 pound
roller with no perceptible damage. Three times the normal length of the
test. The equivalent of over 30 years actual use. Accordingly we offer a
10 year non-prorated / 30 year prorated warranty on the Supple-Pedic 3000,
4500, and 6000 models and a 5 year non-prorated / 20 year prorated
warranty on the Supple-Forma mattresses.
Europeans have used removable and cleanable mattress covers for years.
Allergens, bacteria, and ammonia from perspiration will build up in any
mattress cover creating unsanitary conditions. Every mattress cover should
be cleaned every six months to one year.
The Supple-Pedic mattress is offered in 3 different covers, 2
European stretch covers and a traditional Damask cover. Each of these
covers is zippered and removable to allow for easy cleaning.
The natures of the materials in Supple-Pedic are simply non-allergenic.
Dust Mites simply cannot live in Polyfilax or any other component of the
mattress due to the nature of the material.
The inner components of Supple-Pedic are three or more separate layers:
Polyfilax, Lever-Spring unit, and base. Each layer can be taken out
separately and aired out. If a component should ever need replacement, you
can change just that part without having to replace the entire mattress.
Conversely you can create different feels in a dual system for two
sleepers. If one wants a softer feel such as the 6000 and the other wants
the firmer feel of the 3000, you can achieve this in one mattress with
|Accepts Adjustable Beds
Unlike most innersprings, Supple-Pedic does not have a border wire and is
flexible enough to use on any adjustable bed base.
Next: Features and Benefits